Ka dib marka mashiinka jarista laysarka uu cillado sameeyo, sidee baad ku heli kartaa barta diiradda la saarayo?

Ka dib marka mashiinka jarista laysarka uu cillado sameeyo, ku soo noqoshada eber-ka (asalka nidaamka isku-duwidda mishiinka) waa tallaabo muhiim ah oo lagu soo celinayo shaqada caadiga ah. Fadlan hubi inaad marka hore raacdo mabda'a badbaadada oo aad si taxaddar leh u shaqeyso. Kuwa soo socda waa tallaabooyinka faahfaahsan iyo hababka loo maareeyo xaaladaha kala duwan:

Tallaabada 1: Diyaargarowga Badbaadada iyo Kormeerka Hordhaca ah

1. Badbaadada Marka Hore:Ka jar korontada/karti-fur. Inta badan mashiinnada, marka hore gal nidaamka, hel badhanka "Awood-siinta" ama "Servo Ready", oo dami si aad u hubiso in mashiinku uusan si lama filaan ah u dhaqaaqin. Haddii cilladdu ay daran tahay (sida isku dhac rabshado wata), waxaad si toos ah uga goyn kartaa korontada ugu weyn ee mashiinka.

2. Nadiifi miiska shaqada:Ka saar walxaha la jarayo, qashinka, iyo wax kasta oo caqabado ah si loo hubiyo inaysan jirin wax caqabado ah oo ku yimaada waddooyinka safarka ee miiska shaqada iyo alwaaxa isgoyska, taasoo ka hortagaysa isku dhacyada labaad inta lagu jiro habka guriga.

3. Baadh qalabka:Si muuqaal ah u hubi madaxa laysarka, af-xidhka, dareemayaasha, iyo qaybaha kale si aad u ogaato waxyeello jireed oo muuqata. Haddii ay dhacdo shil, hubi inaad hubiso oo aad hagaajiso dhibaatooyinka qalabka (sida beddelka af-xidhka ama dareemaha shilka), haddii kale si sax ah uma soo noqon doonto eber.

4. Caddee sababta cilladda:Dib u xasuuso ama hubi macluumaadka digniinta. Cilladaha caadiga ah ee keena eber khasaare waa:

• Cilad degdeg ah oo ku timaadda korontada inta lagu jiro farsamaynta.
• Mashiinka saameynta (madaxa jarista ayaa ku dhaca saxanka, qalabka ama sariirta).
• Hawlgal aan habboonayn marka la isticmaalayo shaqada "Qoritaanka/Jarista iyadoo la adeegsanayo Breakpoint."
• Cilad ku timaada nidaamka ama software-ka.

Tallaabada labaad: iyadoo loo eegayo nidaamyada xakamaynta iyo duruufaha kala duwan si loo doorto habka eber

Fiiro gaar ah: Hawlgallada soo socda waxay ku salaysan yihiin nidaamyada xakamaynta jarista laysarka ee caadiga ah (sida Baichu, Jiaqiang, iwm.). Fadlan hubi inaad hubiso qalabkaaga

Buugga gaarka ah ee isticmaalaha.

Kiiska A: Dib-u-celinta farsamada caadiga ah ee eber (inta badan la isticmaalo laguna taliyay)

Kani waa habka ugu dhammaystiran uguna saxsan ee lagu soo ceshan karo dhibicda eber, taas oo ku habboon xaaladaha aan caadiga ahayn ama dib-u-bilaabidda. Nidaamka xakamaynta ayaa kaxayn doona dhidib kasta (X, Y, Z) si uu ugu dhaqaaqo jihada hore loo dejiyay ilaa badhanka asalka farsamada la kiciyo, taasoo go'aaminaysa eber dhammaystiran oo jireed.

1. Shid:Ku xidh korontada ugu weyn oo bilow nidaamka xakamaynta iyo qalabka mashiinka.

2. Ku noqo qaabka eber:

• Isku-xirka software-ka xakamaynta, ka raadi badhamada ama ikhtiyaarrada liiska sida "Back to Origin", "Back to Zero", "Mechanical Back to Zero" ama "Go Home", "Home", "Ref" oo Ingiriis ah.
• Badanaa astaanta badhanka dib-u-noqoshada eber waa "guri" ama "bullseye".

3. Samee eber soo celin ah:

• Fiiro gaar ah: Si loo hubiyo badbaadada, waxaa lagu talinayaa inaadan si toos ah u riixin "hal fure si aad ugu laabato eber", laakiin inaad si gooni ah ugu laabato eber dhidibyada kala duwan. Caadiyan, taxanaha ayaa ah in dhidibka Z (madaxa jarista) marka hore kor loo qaado → dhidibka X wuxuu ku noqdaa eber → dhidibka Y wuxuu ku noqdaa eber → dhidibka Z wuxuu ugu dambeyntii ku noqdaa eber.
• Dhidibka Z kor: marka hore gacanta ku shaqee dhidibka Z si aad u gaarto dherer ammaan ah si aad uga hortagto xoqidda miiska marka aad eber ku soo noqonayso.
• Ku celi eber markeeda: guddiga gacanta ama software-ka, dooro dhidibka X oo guji "Ku noqo eber". Fiiri dhaqdhaqaaqa dhidibka X oo si toos ah u jooji marka uu gaaro booska asalka ah. dhidibka Y sidoo kale waa la shaqeeyaa.
• Ku soo celinta dhidibka Z eber: ugu dambeyntii samee soo celinta dhidibka Z eber, madaxa jaristana wuxuu ku dhici doonaa booska badhanka asalka ogaanshaha.

4. Dhammaystirka xaqiijinta:Ka dib marka la dhammeeyo soo celinta eber ee dhidib kasta, isku-duwayaasha dhidib kasta oo ku jira barnaamijka xakamaynta waa in lagu soo bandhigaa sida (0,0,0) ama qiime yar oo isku-dubarid farsamo oo go'an (sida X0.000,Y0.000). Waxaa sidoo kale laga yaabaa in shaashadda lagu soo bandhigo "eber dhammaystiran".

Kiiska B: Ku maaraynta xusuusta eber/koronto hoos u dhacda

Nidaamyada heerka sare ah ama goobaha gaarka ah, mashiinku wuxuu adeegsadaa "barta eber ee sabeynaya" si uu u xasuusto booska hadda jira ka dib markii uu korontada ku xumaaday.

1. Daawasho kadib dib u bilaabista:Ha dhaqaajin mashiinka ka dib marka aad bilowdo, oo si toos ah u hubi isku-duwayaasha software-ka. Haddii isku-duwayaashu aysan eber ahayn, laakiin aad taqaan isku-duwayaasha booska ugu dambeeya ee badbaadada leh ka hor ka-reebista (ama booska asalka sawirka).

2. Gacanta loo dhigay eber:

• Madaxa jarista gacanta ku dhaqaaji (adigoo isticmaalaya furaha fallaadha ama giraangiraha gacanta) meel la yaqaan oo ammaan ah (tusaale ahaan, hel bartamaha godka ama geeska xaashida).
• Barnaamijka dhexdiisa, wuxuu dejiyaa barta hadda jirta sida asalka shaqada (badanaa Set Workpiece Coordinates ama WCS).
• Laakiin tani ma soo celinayso nidaamka isku-dubaridka mashiinka. Si loo soo celiyo nidaamka isku-dubaridka mashiinka, weli waa lagama maarmaan in la sameeyo eber farsamo oo kiiska A ah ama "dib-u-dejinta nidaamka isku-dubaridka" sida ku cad buug-gacmeedka ".

Kiiska C: Isku-xirnaan aan sax ahayn oo ay keento isku dhac ama jaritaan joogto ah oo ka dhaca meesha jabtay

Waqtigan xaadirka ah, dhibicda eber ee farsamada ayaa laga yaabaa inaan la lumin, laakiin nidaamka isku-dubbaridka shaqada waa la hagaajinayaa.

1. Soo celinta eber ee farsamada marka hore:Marka hore hirgeli heerka caadiga ah ee soo celinta eber ee kiiska A si loo hubiyo in nidaamka isku-dubbaridka qalabka mashiinka uu sax yahay.

2. Dib u dhig shaqada:

• Saxanka ama shaqada dib ugu celi dusha sare ee shaqada.
• Adeegso shaqada "meelaynta" ee nidaamka xakamaynta (meelaynta geeska, booska dhexe, iwm.) ama gacanta ku dhaqaaji madaxa laysarka ilaa geeska jireed ee saxanka.
• Barnaamijka dhexdiisa, u deji qodobkan asalka shaqada cusub (G54, iwm.).
• Dib u soo dejiso ama u wac barnaamijka mashiinka si loo hubiyo in asalka sawirada ee barnaamijka uu la jaan qaadayo asalka shaqada ee hadda la dejiyay.

Tallaabada 3: Xaqiijinta iyo Tijaabinta

Ka dib marka eber dhibic la helo,Hubi inaad sameyso tijaabo socod oo madhan, oo ha si toos ah u jarin walxaha!

1. Tijaabada socodka qalalan:

• Ku shub qaab fudud (sida afargeesle yar ama goobo).
• Barnaamijka dhexdiisa, dhagsii shaqada "dry run", "simulation" ama "go border".
• U fiirso in wadada dhaqdhaqaaqa madaxa laysarka ay la mid tahay sidii la filayay, gaar ahaan haddii booska bilowga iyo dhammaadka ay sax yihiin. Hubi inay taaban doonto qalabka ama geeska dibadda ee saxanka.

2. Waxaan isku dayay in aan gooyo xaqiijinta:

Tijaabada jarista dhabta ah waxaa lagu sameeyaa saxanka qashinka si loo xaqiijiyo in saxnaanta cabbirka iyo qaab-dhismeedka ay sax yihiin.

Su'aalaha Badiya La Weydiiyo iyo Taxaddarrada

Digniinta cillad soo noqosho la'aanta eber:Haddii mashiinku dhaqaaqo laakiin uusan heli karin badhanka asalka ah inta lagu jiro habka soo celinta eber, digniintu waxay noqon kartaa:

• Beddelka asalka ah waa uu dhaawacan yahay ama wuu dabacsan yahay.
• Taabasho liidata oo ku timaadda khadka calaamadda badhanka.
• Cilad ku timaada mootada ama wadista. Waxaa loo baahan yahay in lala xiriiro shaqaalaha dayactirka xirfadleyda ah.

Lama heli karo badhanka dib-u-noqoshada eber:Si taxaddar leh u hubi is-dhexgalka software-ka, ama riix furaha "Home" ee ku yaal kiiboodhka si aad isugu daydo.

Kala duwanaanshaha nidaamyada kala duwan:Berchu (FSCUT), Ruike (RDCAM), Jiilka Cusub, Farley iyo is-dhexgalka kale ee nidaamka way kala duwan yihiin, laakiin macquulka aasaasiga ahi waa isku mid: marka hore hel asalka farsamada, ka dibna deji asalka shaqada.

Samee caadooyin wanaagsan:

• Ka dib boot kasta marka hore dib ugu noqo eber.
• Nadiifi oo si joogto ah u ilaali dareemaha asalka ah.
• Dib u celi xuduudaha mashiinka (gaar ahaan xuduudaha isku-dubbaridka farsamada ee uu dejiyay soo-saaraha) si looga hortago in nidaamku burburo.

Shaxda Socodka Soo Koobidda

Haddii ay dhacdo wax aan caadi ahayn → daminta/daminta korontada → nadiifi miiska oo hubi qalabka → falanqee sababta

↓

Shid oo shid → geli gacanta/ku soo celi qaabka eber

↓

[La doorbidayo] Ku samee "soo celinta farsamada ee eber" dhidibyo kala duwan (dhidibka Z ayaa marka hore la qaadayaa → X → Y → Z)

↓

Ka dib marka eber soo celinta la dhammeeyo, isku-duwayaasha waxaa loo soo bandhigayaa isku-duwayaal eber ama farsamo ahaan

↓

Dib u dhig shaqada, deji "asalka shaqada"

↓

Wadada xaqiijinta tijaabada orodka qalalan → guul → jaritaan caadi ah

↓

Cilad/Qaylo-dhaan → Hubi dareemaha asalka/xidhiidhka adeegga iibka kadib

Haddii tallaabooyinka kor ku xusan aan la xallin karin, ama hawlgalku aanu hubin,Habka ugu ammaansan waa in isla markiiba la joojiyo hawlgalka, la sameeyo soo-saareyaasha qalabka ama bixiyeyaasha adeegga dayactirka xirfadlayaasha ah, si looga fogaado khasaarooyin waaweyn oo ka dhasha hawlgal xumo.