Fiber laser cutting machine is widely respected in the metal processing industry, mainly because of its high production efficiency, as well as the advantages of labor cost. However, there are also many customers after a period of use, found that the production efficiency is not much improved, what is the reason for this? Let’s give you the reason why the production efficiency of fiber laser cutting machine is low.
1. There is no automatic cutting process. Fiber laser cutting machine has no automatic cutting process and cutting parameter database on the system. Cutting operators can only manually rely on experience to carry out drawing cutting, cutting can not do automatic perforation and automatic cutting, manual adjustment is needed, in the long run, the efficiency of fiber laser cutting machine is naturally very low.
2, the use of cutting method is not suitable for cutting metal plate without the use of common edge, borrowing edge, bridge and other cutting methods. In this way, the cutting path is long, the cutting time is long, the production efficiency is very low, at the same time, the consumption of consumables will increase, and the cost is high.
3. Nesting software is not used when typesetting and cutting without nesting software. Instead, manual typesetting is done in the system and parts are cut in sequence according to the blanking order. This will result in a large number of scraps after cutting the plate, low utilization rate of the plate, and the cutting path is not optimized, long cutting time, low production efficiency.
4. The cutting power does not match the actual cutting thickness. The corresponding fiber laser cutting machine is not selected according to the actual cutting. For example, it is actually necessary to cut 16mm carbon steel plate in large quantities, and if you choose a cutting equipment with 3000W power, the equipment can indeed cut 16mm carbon steel plate, but the cutting speed is only 0.7m/min, and long time cutting will lead to increased damage rate of lens consumables, and even affect the focusing lens. It is recommended to use 6000W power for cutting processing.
Post time: Mar-24-2023