With the progress of The Times, laser cutting machine has been widely used in all walks of life, the development of equipment and technology update is also faster and faster. However, many customers still have a lot of problems when cutting thick plate, because thick plate cutting for laser cutting machine requirements are relatively high, so generally to use high-power laser cutting machine for cutting. Although the high power laser cutting machine can be used to cut thick plates, but more or less there will be some problems. Today, Qingyuan laser and you talk about some common problems when laser cutting machine processing thick plate! Thick plate perforation:
Laser perforation is the first action before cutting. The thicker the plate, the longer the piercing time. Therefore, in order to improve cutting efficiency, many laser cutting machine manufacturers will improve the punching time. A common problem with piercings is bursting. The reason for this problem is the use of high-power perforations, which are fast: the huge amount of energy injected into the perforation increases the temperature of the sheet, affecting the subsequent overall cutting. When perforating with low power pulse, the time is very long, resulting in reduced cutting power and increased unit cost. Cutting section:
The difficulty of laser cutting thick plate is much higher than thin plate, the aesthetic feeling of special cutting section is more obvious than thin plate, and the precision is poor. There will even be serious viscous slag phenomenon, which can not fully reflect the laser cutting machine processing value. Processing thick plate laser cutting machine requirements are relatively high, so we must choose high power when choosing laser cutting machine, big brand laser cutting machine manufacturers. Like Pengwo laser professional engaged in laser equipment for more than 10 years, in the R & D and production of laser cutting machine has rich experience, Pengwo laser cutting machine after continuous technology optimization and improvement, laser cutting machine processing thick plate greatly reduced the occurrence of problems!
Post time: Apr-03-2023