With the decrease of temperature, people should pay attention to keep warm, which laser cutting equipment should also pay attention to antifreeze, in order to avoid damage to laser cutting machine in winter, we need to add appropriate antifreeze, do you know what the specific steps are?
For laser cutting equipment, the temperature is too high or too low will affect the use of equipment, water cooling equipment if the antifreeze is not added, it will affect its normal use. We should pay attention to the following seven steps when operating laser cutting equipment:
1. Shut down all systems of the device and set the device to standby state.
2. Prepare antifreeze in advance.
3. Adjust antifreeze. The proportion of antifreeze should be determined according to the local temperature.
4. Determine the mixing ratio of antifreeze and water, prepare the container, pour the antifreeze and water into the container in accordance with the prescribed ratio, and stir well.
5. Open the drain port of the chiller and remove all the original liquid.
6. Open the filling port of the chiller and pour the prepared antifreeze water into it.
7. Turn on the chiller for anti-freezing water circulation to ensure that the liquid level meets the requirements of the equipment; otherwise, continue to add anti-freezing water.
Metal laser cutting machine in the use of maintenance is very important, the same equipment through different operation and maintenance will have different effects, want to extend the service life of the equipment, usually maintenance is essential
Post time: Dec-23-2022