Five axis intersecting line cutting machine function: 1, can cut a number of different directions, different diameters of cylindrical intersecting line holes on the main pipe, to meet the eccentric and non-eccentric vertical intersection conditions of the branch pipe axis and the main pipe axis.
2. The cylindrical intersecting line end can be cut at the end of the branch pipe to meet the conditions of eccentric and non-eccentric vertical intersection and inclined intersection between the branch pipe axis and the main pipe axis.
3, can cut the inclined end face at the end of the pipe.
4, can cut and weld elbows on the round pipe, “Xiami section” diagonal truncation surface at both ends.
5, can cut and annular main pipe intersecting line end.
6, can cut the Angle of the groove surface.
7. It can cut square holes and waist holes on the round pipe. 8, can be cut off steel
The development trend of five axis intersecting line cutting machine:With the development of modern mechanical processing industry, the quality and precision of cutting requirements continue to improve, to improve production efficiency, reduce production costs, with high intelligent automatic cutting function requirements are also improving. The development of CNC cutting machine must adapt to the requirements of the development of modern machine processing industry. 1. The development of intersecting line cutting machine. From several general CNC cutting machine application, the function and performance of the flame intersecting line cutting machine has been relatively perfect, the limitations of the material cutting (only cutting carbon steel pipe), cutting speed is slow, low production efficiency, its scope of application is gradually shrinking, the market can not have a large increase. Plasma intersecting line cutting machine has a wide range of cutting (can cut all metal materials), cutting speed, high efficiency, the future development direction is the improvement of plasma power technology, CNC system and plasma cutting with the problem, such as power supply can cut thicker plate; The improvement and improvement of fine plasma technology can improve the cutting speed, cutting quality and cutting precision. The improvement and improvement of NC system to adapt to plasma cutting can effectively improve the work efficiency and cutting quality. 2, the development of special intersecting line cutting machine. The intersecting line cutting machine is suitable for cutting the cylindrical orthogonal, oblique, eccentric isophase inertial line hole, square hole, oval hole, and can cut the intersecting phase inertial line at the end of the pipe. This type of equipment is widely used in metal structural parts production, power equipment, boiler industry, petroleum, chemical industry and other industrial sectors.
Post time: Jan-10-2023