1. Comply with general cutting machine safety operating procedures. Start the laser in strict accordance with the laser start-up procedure.
2. The operator must be trained, familiar with the structure and performance of the equipment, and master the knowledge of the operating system.
3. According to the regulations, wear labor protection supplies, and wear protective glasses that meet the regulations near the laser beam.
4. Do not process a material before it is clear whether it can be irradiated or heated with a laser to avoid the potential danger of smoke and vapor.
5. When the equipment is in operation, the operator shall not leave the post without permission or ask someone to wait for the tube. If it is really necessary to leave, the machine should stop or cut off the power switch.
6. Keep fire extinguishers within easy reach; Turn off the laser or optical brake when not processing; Do not place paper, cloth, or other flammable materials near an unprotected laser beam. Seven. When anomalies are found in the process of processing, the machine should be shut down immediately, and the fault should be removed in time or reported to the supervisor.
Post time: Aug-01-2023