Laser cutting machine requirements for the environment

Many users for the purchase of laser cutting machine required environmental requirements are not very clear, that laser cutting machine is a large equipment, for the site requirements will not be too high, this is actually a wrong idea. Laser cutting machine is a kind of precision processing equipment, need some corresponding processing environment requirements, in order to maintain the use of equipment effect,The following Pengwo laser for you to introduce the basic environmental requirements：

1. Equipment site layout standards

The necessary safety distance shall be left between equipment and equipment, and between equipment and plant walls. The specific distance shall be changed according to the actual situation of customers, but shall not be less than the technical safety distance.

The factory floor must be concrete or reinforced concrete. The bearing capacity of the area must be at least twice the weight of the equipment. The flatness must be ±3CM.

2. the selection standard of electricity

This equipment uses the national standard 220+10V/50Hz single-phase AC, or 380+10V/50Hz three-phase four-wire AC. If the voltage is unstable or the power does not match, the use of a voltage regulator or transformer is allowed to meet the above standards.

Plant electrical wiring, safety leakage switch and other corresponding plant facilities should ensure that the maximum installed power of the equipment 1.5 times the carrying capacity.

The factory must have a separate good grounding position for proper grounding of the equipment.

3. the selection of auxiliary gas

The main cutting auxiliary gas of standard laser cutting machine is N2 or 02. Some materials can use compressed air as cutting auxiliary gas. N2 cutting surface is bright; 02 Cut surface blackened due to oxidation of the material. The higher the purity of the cutting auxiliary gas, the better the quality of the cutting surface. Because of the low cost of high pressure air, good continuity and more and more customers begin to use it..

Above is the purchase of laser cutting machine on the requirements of the placing environment, hope to help the majority of users in demand to choose equipment.